The 2.5 inch dive form factor dual compact flash adaptor has arrived. It has the 44-pin IDE connector, like a 2.5 inch hard drive, so will need a 44-40 pin adaptor to Qubide, plus a power connector. I hope that the original drive adaptor in the Minis-QL will work with it. So the next steps now will be to connect it all up, place two 4GB compact flash cards in the master and slave CF sockets, power up and hope it all goes to plan. Then I’ll need a fight with the Qubide Partition program to split the compact flash cards into manageable partition sizes and make one a backup copy of the other. Then I’ll finally have a fully working Minis-QL.